How to Reset the Maintenance Light on a Toyota Camry 2007-2015

Different car models are designed with features that help drivers keep the vehicles in good shape. For instance, a maintenance light flashes to remind you of an oil change, as in the Toyota Camry. If the maintenance minder system is on, it needs resetting. 

Thankfully, resetting the maintenance light is an easy process. You are required to quickly push and hold the odometer button located on the dashboard, and turn your key to position two. You should keep holding the odometer button for about 10 seconds. If this process is done correctly, the maintenance light will flash, accompanied by a beeping sound. This turns off the maintenance light. 

This article explains the step-wise procedure of resetting the maintenance light on Toyota Camry models. 

How to Reset the Maintenance Light on a Toyota Camry 2007,2008,2009,2010,2011,2013,2014,2015

how to reset the maintenance light on a toyota camry

Usually, the Toyota Camry is designed such that if it needs any service, such as an oil change, the maintenance light will turn on. The light is located on the dashboard where you can easily see it, as sometimes it could be an indicator of a bigger problem. 

But the reason does not matter, the blinking light may be alarming to any driver, and rightly so. However, some take it as a needless source of worry and want to immediately turn it off. 

The maintenance light can be distracting and frustrating and the next thing you want is to turn it off. Even worse, the light might still be on even after the routine service. Luckily, there is an easy fix. 

Turn the Key to Position One

  • For Toyota Camry, the maintenance light is usually located on the dashboard and labeled as MAINT REQD. Turn the key in the ignition to position one. It is usually the first set before you start the car. You do not have to start the car engine, only turn the key until the dashboard lights come on. 

Locate the Odometer Button

  • Once the dashboard lights come on, locate the button that changes the odometer reading. You are required to quickly and simultaneously push and hold the odometer button on the dashboard while turning the key to the second position—turn the slightly such that the vehicle starts without kicking the engine. 

Hold the Odometer Button for a Few Seconds

  • You should keep holding the odometer button for not less than 10 seconds. The dashboard lights will be on and the odometer will start blinking accompanied by a beeping sound and then all digits will turn to zeros. The light will then go out. 

Release the Button 

  • Once off, you can now release the odometer button and turn the key to start the engine. The MAINT REQD light should be off even after starting the engine. If not, repeat the process. 

What Is the Significance of Oil Change?

When it comes to vehicle maintenance, the most important factors include changing the oil, air filter, and oil filter. Fresh oil is a prerequisite for a healthy engine and superb operation as it works to reduce heat usually caused by internal combustion and friction. Moreover, it serves to keep the components safe from corrosion. 

Every driver tends to have a theory on when they can change the oil on the car. However, it is recommended to change the oil and filters every 6000 miles or once a year, depending on which comes first. 

Since the resetting light is more of a reminder than anything else, if you reset it without an oil change will not have any side effects. However, it is important to follow the service cycle and use the maintenance light for its purpose- a reminder. 

What Does the Maintenance Light Mean on a Toyota Camry?

Typically, the maintenance light serves as a reminder to drivers to change their oil at regular intervals. Sometimes it happens that your mechanic forgets to reset it, or you did not reset it, and the light will keep blinking until it is reset.

Also, remember that the light does not have any connection to any sensors nor does it signal any internal failures or malfunctions in your car. Typically, it works as a mileage counter to warn drivers when they exceed 5000 miles since the last reset. 

How Long Can You Drive After the Maintenance Required Light?

When the maintenance light goes on, it is usually a minor cause of worry. The main concern is how long you can drive with the light staring at your face. 

When the light goes on, it would be advisable to have the car checked with a professional as soon as possible. The general rule of thumb is that you have approximately 500 miles worth of driving, or 2 weeks before the blinking light becomes a major cause of worry.

Do not let it get to this point because the last thing you need is serious mechanical damage. Therefore, it is recommended that any driver take the car to a mechanic, the sooner the better. 

Why Is My Maintenance Light on After an Oil Change?

Besides an oil change, the maintenance light may go on for several other reasons. If your light is still on even after the oil change, it could indicate something different as outlined below. 

Oil Pressure Is Low

For the optimum running of any vehicle, it must have adequate oil pressure. It is important to remember that there are several factors that can contribute to low oil pressure such as clogged oil filters, insufficient oil in the gauge, and malfunctioning pressure gauges. If any of that happens, the light is likely to show. 

Bad Oil Pump

 As the vehicle experience wear and tear over time, the oil pump may not be spared. This is sure to trigger the oil light prompting the owner to replace the oil pump. If action is not taken, the engine will not live to its lifespan. 

Malfunctioning Oil Sensor

The oil light is also likely to turn on if the oil sensor malfunctions. This often occurs randomly as is usually a consequence of wear and tear. It is advisable to sort out the issue as soon as possible as it means that the vehicle does not have adequate oil pressure leading to further damage with time. 

FAQs 

The check engine light and maintenance required light are not the same. They differ in that while the maintenance required light is triggered by mileage and is a reminder of your vehicle’s maintenance schedules, the check engine light is triggered by something faulty in the OBD II system. 

The Toyota maintenance light is not likely to go off on its own. Therefore, it is advisable to turn it off manually so you can have one less distraction on the dashboard. When left on for a long time, the light tends to become annoying and could be alarming to a driver that something major is wrong. 

The Toyota Camry maintenance cost is around $4200 for both maintenance and repairs during its first 10 years of use. This value is way above the industry average of $2890. 

Final Thoughts

The maintenance minder system is there for your good as a driver and car owner. If the light is on, it is just a reminder that your car needs an oil change.

This reminder goes a long way in preventing potential engine damage that would be the result of failing to perform an oil change as scheduled. However, if you want to reset it by yourself, this article comes in handy. It allows you to reset it when you have to in a few simple steps.

Related Posts: