The majority of more recent cars, like the Nissan Juke, include tyre pressure monitoring systems that illuminate a warning light on the dashboard when the tyres are underinflated.
A tyre pressure monitoring system (TPMS) is installed in the Nissan Juke to alert the driver when one or more tyres are considerably under or over-inflated. Driving in such conditions might endanger your safety on the road by negatively affecting handling and braking, wearing out and unevenly wearing your tyres.
This article goes into further detail to explain on Nissan juke tyre pressure warning light won’t go off.
Why Won’t My Nissan Juke’s Tire Pressure Warning Light Turn Off?
The Nissan Juke’s TPMS warning light is on. When one or more tyres have low air pressure, a pressure sensor’s battery has run out, the TPMS receiver module is broken, or a pressure sensor has been damaged. There are numerous excellent explanations for why this could occur;
Low Battery Power in the Tyre Pressure Sensor
A lithium-ion battery that is already present within the juke powers each tyre’s pressure sensor. The sensor stops sending tyre pressure data to the receiver module when the battery is low. When this occurs, the TPMS warning light will flash each time you start the engine and stay on until you switch the ignition off.
Low Tyre Pressure
When the TPMS warning light appears on the dashboard of your Nissan Juke, pull over when it’s safe to do so, then check the pressure of each tyre, including the spare. When a tyre is driven on while considerably underinflated, the tyre overheats and may eventually fail.
It’s possible that you just replaced your spare tyre, which has been lying around for some time without any thought or care. Not all spare tyres have TPMS, but if they do and the pressure is low, the warning light can turn on.
Even with the spare tyre or if the automobile is in storage and not being driven, almost all tyres progressively lose air pressure over time through the inflation valve.
Although there is a cap, the valve’s function is to keep dirt out rather than to better keep the air in. To minimize disappointment when you need your spare, it is advised to inflate it to the ideal pressure once a month.
When the pressure light comes on and stays on each time the car is started, even though you have used a pressure gauge to ensure that all tyres are inflated to the recommended ideal level, the TPMS is not working properly. It is preferable to consult a mechanic or a Nissan dealer in this situation so that the TPMS can be examined and probably changed.
Extreme Cold Weather
One of the most frequent reasons for the Nissan Juke’s low tyre pressure warning light is cold weather. When the temperature becomes colder, the tyre pressure lowers, which could activate the TPMS warning light in your car because tyres, like all other materials, expand when heated and contract when cold.
Usually, the tyres will warm up once you begin driving. The warning light will turn off as the air inside the tyre expands, raising the tyre pressure.
Recent Tyre Replacement
If a pressure sensor on your juke stopped working after you put on new tyres, it’s conceivable that the sensor was harmed in the process. These sensors are highly delicate and can break if extreme caution is not used when changing tyres.
In this instance, simply driving your juke at a consistent speed for ten or more minutes will suffice to turn off the warning light. You would be needed to take your automobile to a mechanic for additional diagnostics if this did not fix the problem.
Resetting Your Tyre Pressure Light
The tyre pressure light ought to automatically turn on when you need to re-inflate your tyres. If it continues to be on, however, follow these instructions to help you get back on the road and guarantee a safer trip.
- For at least 10 minutes, drive at or above 50 mph to reset the sensor. When you start the car again, this may force your sensor to reset.
- Turn the key to the on position when the car is off but do not start it. When the tyre pressure light blinks three times, release pressure on the TPMS reset button. Start the car, and then wait for the sensor to refresh for around 20 minutes. Under the steering wheel is where you’ll find the reset button for the tyre pressure monitor. If you still can’t find it, check in your car’s owner’s manual.
- Your tyres should be inflated to 3 PSI more than what is suggested, followed by a complete deflation. Include the spare tyre as well because it can include a sensor. Reinflate them to the optimum tyre pressure after they have all been deflated.
- Disconnect the positive battery cable using a wrench while the car is off. For roughly three seconds, turn on the car and honk the horn. Any remaining energy in the car will be released as a result. The battery is then reconnected.
What Does a Flashing Tyre Pressure Light Pressure Mean?
You could just be curious as to what it means when the tyre pressure signal flashes on your dash. There are several reasons, but it’s crucial to understand that you should stop right away if your dashboard light starts to flash.
Resetting your sensors may help if there is a sensor issue, which is another possibility. Whatever the problem, make sure to have your experienced service providers examine the battery and pressure sensors to determine the precise source of the problem.
Why Does My Tyre Pressure Keep Getting Low?
Your juke may have an air leak if the TPMS warning light illuminates repeatedly and the tyre pressure starts to drop after you’ve inflated the tyres. The air may be leaking from a faulty valve stem or one or more of the tyres may have been punctured by an outside object.
Sometimes having a tyre pressure warning light on your Nissan juke could mean that your car tyre pressure is low or the TPMS is no longer functioning properly. It is recommended to understand your car’s signals to avoid further damage to your car. Also, ensure that you have your spare tyre with you at all times and is inflated to the optimum pressure.