The bolt pattern is one of the important factors that you need to consider when you intend to change the wheel of your car.
This should not be ignored during a replacement. Installing the wrong pattern does not achieve the desired look. Therefore, it is important to know which cars have the bolt pattern you are looking for.
If you have a 5 x 115 bolt pattern but you do not know which car make or model it is most suited to, you may be glad to know that there are 90 models for this type of wheel. These car models are from different manufacturers such as Buick, Cadillac, Chevrolet, Dodge, Chrysler, Pontiac, Suzuki, Opel, Lancia, GMC, Daewoo, and Vauxhall. This way, it is possible to get the model of your choice.
This article explains more about the 5 x 115 bolt pattern, and whether it is interchangeable with the 5 x 114.3 bolt pattern.
What Cars Have a 5 X 115 Bolt Pattern?
There is a wide variety of great vehicles that sport the 5 x 115 bolt pattern. These include Buicks, Cadillacs, Pontiacs, Chevrolets, Dodgers, Chryslers, and many more. This wheel pattern can be incorporated in a wide range of vehicles, be it a classic American muscle, or a refined vehicle with high-end luxury.
What Is the 5 X 115 Bolt Pattern?
A bolt pattern is also referred to as a bolt circle. Typically, it is the diameter of an imaginary circle measured from the center of the wheel lugs.
With that in mind, the 5 x 115 bolt pattern is made up of a stud count of five, and a bolt measurement of 115 (the notional circle determined by the center position of the studs). Generally, a 5 x 115 bolt pattern represents a 5-lug pattern on a circle of diameter 110mm
What Are the Effects of Using the Wrong Wheel Size?
Using wheels that are not suitable for your car is dangerous. Firstly, the wheel can roll over if it is too large and result in an accident. Also, if they are too large, they tend to rub against the suspension system components.
With time, this causes steering issues. On top of that, very large tires lift the bumper which poses a safety risk in the event that your vehicle is hit from behind.
Furthermore, given that the whole weight of the car rests on the wheels, smaller wheels may not be able to withstand the weight for a long time.
How Can I Determine the Right Wheels for My Vehicle?
The bolt pattern is not the only factor to consider when looking for compatible wheels for your vehicle.
Other factors include wheel offset, which is a term used to describe the distance between the wheel centerline and hub mounting surface. Moreover, the size of the rim and the size of the tire should be selected accurately.
Also Read: Can You Over-Tighten Lug Nuts by Hand?
How Do I Determine the Bolt Pattern of My Car?
It is possible to manually check the bolt pattern of the wheels in your car. You can start by inspecting the wheels, and then proceed to count the number of nut spaces on the wheel.
Afterward, a tape measure comes in handy to measure the distance between the two wheels that face each other. Then, measure the diameter of one wheel in inches. With this measurement, ensure you get a comparable size (1 inch is equivalent to 25.4mm).
What Vehicle Rims Are Interchangeable?
Luckily, it is possible to get interchangeable vehicle rims. You are only required to ensure that the bolt patterns, wheel offset, and wheel size of the old wheel are similar to those of the new one.
You can find the right side of the rim for your car by measuring the rim or checking the sticker label on the inside of the driver’s door.
Are 114.3 and 115 Interchangeable?
There is a distinct difference between the 114.3 and 115 patterns that render them not interchangeable. It does not lie in the rounds, and although they are very close, it does not mean that either of them can be used in place of the other.
Unfortunately, many 114.3 cars on the road are listed as 115-wheel bolt patterns and vice versa. This should not be the case. When it comes to rounding metrics, 5 x 115 is easier to write than its counterpart 5 x 114.3.
Their difference can also be seen when you replace the 5 x 114.3 with a 5 x 115-wheel pattern. When you install the rotor back on the hub and give it a closer look you will notice that the nuts do not sit properly. Interchanging them is not recommended.
Also Read: What Is RDS on a 2014 Hyundai Tucson?
Can a 5 X 114.3 Fit a 5 X 115?
5 x 114.3 and 5 x 115 bolt patterns are not interchangeable. The 5 x 114.3 is not likely to fit the 5×115 wheel. This is major because the 5 x 114.3 will be 0.7 mm short on all sides, and this makes it not bolt up safely. It, therefore, poses a safety hazard and your wheel may run loose when you least expect it.
Final Words
Different vehicles come with different specifications, and one of them is the wheel bolt pattern. This feature is often overlooked, and that is why many people make the mistake of interchanging the 5 x 115 with the 5 x 114.3. This is not recommended and is could lead to long-term problems with your car.
Related Posts:
